In this lab, we will go over different multicast common deployment scenarios. 1st section will cover PIM dense mode and its behaviour and 2nd section covers PIM sparse mode. Both sections starts with configuration, and ends with debugging, validation [...]
Configure HSRP and tune its timers, tracking features and validate with logs and debugs.
If you are considering CCNA as your next certification, then you are about to embark on an exciting and rewarding journey. CCNA (Cisco Certified Network associate) is your starting point for gaining knowledge in networking [...]
MPLS labeled packet flow Once LDP protocol has established a session and labels are distributed. How is a packet switched from ingress LSR to destination Egress LSR ? Using below topology and an actual lab, [...]
MPLS introduction & Basic configuration Multi protocol labels switching (MPLS) uses labels to forward packets, instead of traditional routing. Alternatively to having each router looking up the destination in each packet's header and forwarding it [...]
