Blog

20 05, 2026

AI Usage Guidelines for Network Engineers

2026-05-22T14:38:59+01:00

Core Principles Garbage In, Garbage Out (GIGO) AI output quality depends entirely on the quality of the input. DO DO NOT Provide clear, accurate, and complete prompts Include relevant technical context and constraints Verify configuration [...]

AI Usage Guidelines for Network Engineers2026-05-22T14:38:59+01:00
25 08, 2025

Choosing Between EVE-NG and Cisco Modeling Labs – CML

2026-05-22T09:45:07+01:00

Whether you are a professional or working on your tech certifications, labbing is no longer a luxury, but a must. While studying and preparing for certifications, labbing the concepts will not only help you [...]

Choosing Between EVE-NG and Cisco Modeling Labs – CML2026-05-22T09:45:07+01:00
16 08, 2025

Ansible For Network Configurations

2026-05-22T10:38:49+01:00

When I use Ansible, it is not just to pull info by running show commands, as we did in the previous post. One of the most useful features I rely on, is to generate [...]

Ansible For Network Configurations2026-05-22T10:38:49+01:00
17 01, 2023

IPv4 & IPv6 Addressing and Routing Foundation

2026-05-22T11:14:36+01:00

IPv4 Addressing IPv4 addresses are 32 bits and presented in 4 octets separated by a dot. Addresses must be unique, else traffic destined to one host address could end up at another host. IPv4 address is made up [...]

IPv4 & IPv6 Addressing and Routing Foundation2026-05-22T11:14:36+01:00
31 12, 2022

5 things to do when starting a new network job

2026-05-22T12:40:45+01:00

When you have just started or about to start a new job in networking or tech in general, you have a very small windows during which you are hopefully not already overloaded with tasks and activities. During this honeymoon [...]

5 things to do when starting a new network job2026-05-22T12:40:45+01:00
29 08, 2022

Cisco IOS-XR Telnet and SSH configuration

2026-05-22T11:07:39+01:00

Cisco IOS-XR Telnet and SSH configuration Every network node must be remotely managed. This can be either out of band, meaning you are coming to the node via a network dedicated to management traffic only. Or inband, [...]

Cisco IOS-XR Telnet and SSH configuration2026-05-22T11:07:39+01:00
17 08, 2022

Cisco IOS-XR OSPF single area

2026-05-22T12:41:37+01:00

In this demo, we configure OSPF single area between an XR node and IOS node. It is assumed that you are familiar with the  IOS config syntax, therefore only XR part will be shown. [...]

Cisco IOS-XR OSPF single area2026-05-22T12:41:37+01:00
15 08, 2022

Cisco IOS-XR Basics

2026-05-22T12:42:27+01:00

For most of us, working with Cisco means Cisco IOS. A syntax and CLI we are familiar with, a way of configuring we have learnt from the majority of books and materials. But when you start looking at Cisco [...]

Cisco IOS-XR Basics2026-05-22T12:42:27+01:00
Go to Top